������������������������������������������������������������
�����������������������������������������������������������
�������������������������������������������������������������
SECTION 1
������������������������������������������
1 DESCRIPTION AND MAIN FEATURES
1.1 INTRODUCTION
This manual provides instructions for installation and all
information considered necessary for knowledge, correct
use and routine maintenance of the PONYBENCH
BTPLUS SCISSOR LIFT, manufactured by SPANESI
S.p.A., San Giorgio delle Pertiche (Padova) - Italy.
For the sake of simplicity from now on in this manual the lift
will be called PONYBENCH BTPLUS.
The following does not provide a complete description
of the various lift parts or a detailed explanation of their
operation.
However, the user will fi nd all the information necessary for
safe use and maintenance.
•
PONYBENCH BTPLUS is an electro-hydraulic lift with
pulling facility.
SPANESI S.p.A. has produced this handbook on using
PONYBENCH BTPLUS.
This manual is an integral part of the product and must kept
������������������������������������������������������������������
carefully and in good condition for consultation throughout
���������������������������������������������������������������������������������
the life of PONYBENCH BTPLUS.
Further copies of the instruction manual can be obtained
������������������������������
on request from:
������������������������������
The instructions given in this manual must be followed
to ensure operator safety, correct operation, economic
running and long life of the machine. It is of fundamental
importance to observe all the directions given in this
manual.
WARNING!
responsibility for direct or indirect damage
caused to people, animals, or property, due
to negligence or failure to comply with these
instructions.
��������������
������������������������������
���������������������������
������������0�� �333211
����������� 0�� �������
��������������������������
�����������������com
�
SPANESI
S.p.A.
1.2 GUARANTEE
SPANESI S.p.A. guarantees PONYBENCH BTPLUS and
its accessories for 12 months from date of purchase. This
guarantee covers repair or replacement free of charge of
parts which, after careful examination by the manufacturer's
Technical Department, are found to be defective, excluding
all electrical parts. The guarantee is limited to defects in
material and ceases if the parts returned are found to
have been tampered with or dismantled by non-authorised
personnel.
Responsibility for direct or indirect damage caused to
persons, animals or property due failure or faulty operation
of the machine are excluded from the guarantee.
Expenses relating to replacement of lubricants, transport
expenses, customs duties, VAT and any other expenses
not stated in writing in the supply contract must in any
case be borne by the purchaser. Replacement or repair of
materials under guarantee does not extend the guarantee
terms. The purchaser may exercise the rights offered by
the guarantee only if s/he has observed the terms of the
guarantee specifi ed in the supply contract. Whenever the
parties not wish to submit to an arbitration judgement any
disputes arising from the supply contract and any other
cases in which a legal decision is require will be referred
exclusively to the Court of Padova.
1.3 ITEMS EXCLUDED FROM THE GUARANTEE
Upon delivery, the purchaser must check that the product
has not been damaged during shipment and that all
the accessories have been included and are in perfect
condition. Any claims must be notifi ed within 8 days of
delivery of the lift. In addition to the cases provided for in
the supply contract, the guarantee will be considered null
and void:
•
If the machine has been used incorrectly by the
operator.
•
If the damage is due to insuffi cient maintenance.
•
If the lift is overloaded, exceeding the maximum
capacity.
•
If the machine has been altered, and the damage
is caused by these alterations as a result of repair
work carried out by the user without the approval of
SPANESI S.p.A. or due the use of nonoriginal spare
declines
all
parts.
•
If the instructions in this manual are not followed.
54