3. Move the cutting height lever forward and rearward
to adjust the cutting height.
Note: The selected cutting height is shown with the
numbers 1-7 on the cutting deck. Refer to the table
below
4. Adjust the parallelism of the cutting deck. Refer to
adjust the parallelism of the cutting deck on page
30 .
Number
Cutting height, mm / in.
1
30 / 1.2
2
40 / 1.6
3
52 / 2
4
64 / 2.5
5
76 / 2.3
6
93 / 3.7
7
112 / 4.4
To operate the air condition in the
cabin
1. Engage (A) and disengage (B) the air condition with
the water valve on the hose to the right of the
forward pedal.
ON
A
OFF
B
22
2. Turn the airflow adjuster to set the airflow (0-3).
3. Pull the circulation lever to the right (A) to engage
and to the left (B) to disengage the circulation
throttle.
To
To stop the engine
1. Park the product on level ground.
2. Apply the parking brake.
3. Push in the PTO button to disengage the drive on
the cutting deck.
4. Pull the hydraulic lift lever for the cutting deck
rearward to lift the cutting deck to transport position.
5. Move the throttle control forward to the MIN.
position.
A
B
740 - 004 -