To Operate The Product; To Lift The Cutting Deck; To Lower The Cutting Deck To The Float Position - Husqvarna P 535HX Manual De Usuario

6. At the end of operation or when you do maintenance
on the product, turn the main switch to OFF.

To operate the product

1. Start the product. Refer to
page 33 .
2. Release the parking brake.
3. Carefully push down 1 of the speed pedals. The
speed increases the more the pedal is pushed down.
Use pedal (A) to move forward, and pedal (B) to
move rearward.
A
4. Release the pedal to brake. To brake harder, push
down the other speed pedal.
To lower the cutting deck to the float
position
1. Start the electrical drive. Refer to
product on page 33 .
1591 - 001 - 21.12.2020
To start the product on
B
To start the
2. Move the lever for the hydraulic lifting arms forward

to lower the cutting deck to the float position.

3. Start the hybrid drive. Refer to
on page 33 .
4. Pull the PTO button out to engage the drive on the
cutting deck blades.

To lift the cutting deck

1. Start the electrical drive. Refer to
product on page 33 .
2. If the cutting deck is engaged, push the PTO button
in to disengage the drive on the cutting deck.
3. Move the lever for the hydraulic lifting arms rearward
to lift the cutting deck.
To start the product
To start the
35