Style Function - Brother P-touch 1800 Guia Del Usuario

You can choose from nine different character styles to apply to your text.
Characters printed using the smaller sizes may be difficult to read if certain style
settings (e.g., I+SHADOW) are selected.
The following style settings are available:
NORMAL
BOLD
OUTLINE
SHADOW
ITALIC
The default style setting is NORMAL. The style indicator at the bottom right of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to Reference at the end of this section for samples of the available settings.
To change the style setting:
1
While holding down
play the current style setting.
2
While still holding down
ting is displayed.
The current style setting is shown by the style indicator at the bottom right of
the display.
3
Release
EXAMPLE
To select the I+SHADOW style setting:
1
While holding down
press

STYLE FUNCTION

I+BOLD (italic & bold)
I+OUTLINE (italic & outline)
I+SHADOW (italic & shadow)
VERTICAL
, press
to apply the selected style setting to the entire text.
Style
once, and keep
held down.
Style
once, and keep
, continue pressing
,
S T Y L E
Alt
N O R M A L
Caps
Font 1 Font 2
held down to dis-
Style
until the desired style set-
Auto
Length
Underline
Frame
53