Optional Ac Adaptor - Brother P-touch 1800 Guia Del Usuario

The AC adaptor (model AD-60) allows you to use this machine wherever there is an elec-
trical outlet.
To connect the optional AC adaptor:
1
Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the
right side of the machine.
2
Insert the plug on the adaptor into the nearest standard electrical outlet.
Only use the AC adaptor designed exclusively for this machine.
Remove the batteries and disconnect the AC adaptor if you do not intend to
use this machine for an extended period of time. When the power is discon-
nected, all text shown in the display and stored in the memory will be lost.
When the AC adaptor is connected, unplugging the adaptor from the electri-
cal outlet before unplugging it from the machine can delete all text files in
the memory, even if batteries are installed.
It is recommended that you use the AC adaptor when printing large fonts on
3/4 " (18-mm)-wide tape since this operation can quickly drain the batteries.
6

OPTIONAL AC ADAPTOR