Publicidad
Idiomas disponibles
Idiomas disponibles
Programming Guide S-100W - Ver. 1.0
Power Mode
This parameter determines whether or not power remains on after a decode attempt. In low
power mode, the decoder enters into a low power consumption mode to preserve battery life
after each decode attempt. In continuous power mode, power remains on after each decode
attempt.
Continuous On
(Default for scan module)
Low Power Mode
(Not available for scan module)
Time Delay to Low Power Mode
This parameter sets the time the decoder remains active after decoding. The decoder wakes
upon trigger pull or when the host attempts to communicate with the decoder.
Note: 1. This parameter only applies when Power Mode is set to Low Power.
2. This setting is not available for scan module since it is always in presentation mode and its
power is continuous on.
1 Second
5 Seconds
1 Minute
175
Publicidad
Capítulos
