BZ-TECH D-6448 Manual De Instrucciones página 270

Programming Guide S-100W - Ver. 1.0
Set Lengths for Codabar
The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for Codabar to any length, one or two
discrete lengths, or lengths within a specific range.
• One Discrete Length - Select this option to decode only Codabar symbols containing a
selected length. Select the length using the numeric bar codes in Appendix D, Numeric Bar
Codes. For example, to decode only Codabar symbols with 14 characters, scan Codabar - One
Discrete Length, then scan 1 followed by 4. To correct an error or to change the selection, scan
Cancel barcode.
• Two Discrete Lengths - Select this option to decode only Codabar symbols containing either
of two selected lengths. Select lengths using the numeric bar codes in Appendix D, Numeric
Bar Codes. For example, to decode only Codabar symbols containing either 2 or 14 characters,
select Codabar - Two Discrete Lengths, then scan 0, 2, 1, and then 4. To correct an error or to
change the selection, scan Cancel barcode.
• Length Within Range - Select this option to decode a Codabar symbol with a specific
length range. Select lengths using numeric bar codes in Appendix D, Numeric Bar Codes.
For example, to decode Codabar symbols containing between 4 and 12 characters, first scan
Codabar - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers must always be
preceded by a leading zero). To correct an error or change the selection, scan Cancel barcode.
• Any Length - Scan this option to decode Codabar symbols containing any number of
characters within the decoder capability.
Codabar - One Discrete Length
Codabar - Two Discrete Lengths
Codabar - Length Within Range
Codabar - Any Length
269