BZ-TECH D-6448 Manual De Instrucciones página 194

Programming Guide S-100W - Ver. 1.0
Video View Finder
Select Enable Video View Finder to project the video view finder while in Image Mode, or
Disable Video View Finder to turn the video view finder off.
Disable Video View Finder
Enable Video View Finder
Target Video Frame Size
Select the number of 100-byte blocks to be transmitted per second. Selecting a smaller value
allows more frames to be transmitted per second but reduces video quality; selecting a larger
value increases video quality but slows transmission.
To set the Target Video Frame Size, scan the bar code below followed by two bar codes from
Appendix D, Numeric Bar Codes corresponding to the 100-byte value from 800 to 3300 bytes.
For example, to select 1500 bytes, enter 1, 5. To select 900 bytes, enter 0, 9.
Target Video Frame Size
Video View Finder Image Size
Select the number of 100-byte blocks. Values range from 800 to 3000 bytes.
Selecting a smaller value allows more frames to be transmitted per second; selecting a larger
value increases video quality.
To set the Video View Finder Imager Size, scan the bar code below followed by two bar codes
from Appendix D, Numeric Bar Codes corresponding to the 100-byte value from 800 to 3000
bytes. For example, to select 1500 bytes, enter 1, 5. To select 900 bytes, enter 0, 9.
193