BZ-TECH D-6448 Manual De Instrucciones página 250

UPC-E1 Preamble
Preamble characters are part of the UPC symbol, and include Country Code and System
Character. There are three options for transmitting a UPC-E1 preamble to the host device:
transmit System Character only, transmit System Character and Country Code ("0" for USA),
and transmit no preamble. Select the appropriate option to match the host system.
No Preamble (<DATA>)
System Character & Country Code
(<COUNTRY CODE> <SYSTEM
CHARACTER> <DATA>)
Convert UPC-E to UPC-A
Enable this to convert UPC-E (zero suppressed) decoded data to UPC-A format before
transmission. After conversion, the data follows UPC-A format and is affected by UPC-A
programming selections (e.g., Preamble, Check Digit). When disabled, UPC-E decoded data is
transmitted as UPC-E data, without conversion.
Convert UPC-E to UPC-A (Enable)
Programming Guide S-100W - Ver. 1.0
System Character (<SYSTEM
CHARACTER> <DATA>)
Do Not Convert UPC-E to UPC-A
(Disable)
249