BZ-TECH D-6448 Manual De Instrucciones página 222

Programming Guide S-100W - Ver. 1.0
USB Ignore Unknown Characters
This option applies only to the HID Keyboard Emulation device and IBM device. Unknown
characters are characters the host does not recognize. When Send Bar Codes With Unknown
Characters is selected, all bar code data is sent except for unknown characters, and no error
beeps sound. When Do Not Send Bar Codes With Unknown Characters is selected, for IBM
devices, bar codes containing at least one unknown character are not sent to the host, and an
error beep sounds. For HID Keyboard Emulation devices, the bar code characters up to the
unknown character are sent, and an error beep sounds.
Send Bar Codes
with Unknown
Characters(Transmit)
Do Not Send Bar Codes with
Unknown Characters (Disable)
Emulate Keypad
When enabled, all characters are sent as ASCII sequences over the numeric keypad. For
example ASCII A would be sent as "ALT make" 0 6 5 "ALT Break". This allows support for
other country variants.
Disable Keypad Emulation
Enable Keypad Emulation
221