Sime MURELLE EV Serie Manual Del Usuario página 104

BOILER
Instantaneous boiler with diverter
valve microswitch and flow switch
Instantaneous boiler with diverter
valve microswitch, flow switch
and solar combining
25/55 - 30/55 - 30/50
Only heating
Instantaneous boiler with diverter
valve and flowmeter
Instantaneous boiler with diverter
valve, flowmeter and solar combining
D.H.W. tank with double pump
and D.H.W. sensor (LOW INERTIA)
D.H.W. tank with double pump and
D.H.W. thermostat or heating only
(LOW INERTIA)
Heating only and
antifreeze sensor (LOW INERTIA)
D.H.W. tank with diverter valve and
D.H.W. sensor (HIGH INERTIA)
D.H.W. tank with double pump and
D.H.W. sensor (HIGH INERTIA)
D.H.W. tank with diverter valve and
D.H.W. thermostat or heating only
(HIGH INERTIA)
D.H.W. tank with double pump and
D.H.W. thermostat (HIGH INERTIA)
Heating only and
antifreeze sensor (HIGH INERTIA)
NOTE: the inside of the upper door of the
boiler panel has a label with the values
that have to be set for PAR 1 and PAR 2
(fig. 21).
104
PAR 2
1
EXPANSION CARD
2
PAR DESCRIPTION
40 Number of expansion boards
3
41 Mix valve stroke time
42 Priority of D.H.W. over mixed zone
4
43 Floor drying
5
6
44 Type of solar system
∆
45 t solar collector pump 1
7
46 Solar integration delay
47 Tmin solar collector
48 Tmax solar collector
8
PARAMETERS RESTORATION
9
PAR DESCRIPTION
10
49 * Reset default parameters
(par 01 - par 02 = "-")
11
* In case of difficulty in understanding the current setting or in case of an anomalous or
incomprehensible conduct of the boiler, we suggest to restore the initial values of the parameters
setting PAR 49 = 1 and the PAR 1 and PAR 2 as specified at point 3.3.1.
12
13
14
PARAMETERS INSTALLER
RANGE UNIT OF
MEASUREMENT
0 ... 3
0 ... 199
0 = Paralle
1 = Absolute
0 = No activated
1 = Curve A
2 = Curve B
3 = Curve A+B
1 ... 7
PAR 74 OEM - 1... 50
"--", 0 ... 199
"--", -30 ... 0
"--", 80 ... 199
RANGE UNIT OF
MEASUREMENT
-- , 1
INC/DEC DEFAULT
UNIT SETTING
= 1 0
10 sec. 1 12
= = 1
= = 0
= 1 1
°C 1 8
Min. 1 0
°C 1 - 10
°C 1 120
INC/DEC DEFAULT
UNIT SETTING
= = =