Din Radio Provision With Pocket - Metra 99-7423 Instrucciones De Instalación

DIN radio provision with pocket

1. Slide the DIN cage into the radio
housing and secure by bending the
metal locking tabs outward. (Figure A)
2. Slide the aftermarket radio into the cage
until it snaps into place. (Figure B)
3. Attach the radio housing trim plate
supplied with the kit to the assembly.
4. Snap in the pocket into the assembly.
(Figure C)
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Reassemble dash in reverse order
of disassembly.
Kit Assembly 99-7423
5
(Figure A)
(Figure B)
(Figure C)