Kit Assembly - Metra 99-9104 Instrucciones De Instalación

DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the Radio
Housing and secure by bending the
metal locking tabs down. (Figure A)
3. Slide the radio back into the sleeve
until it clicks in. (Figure B)
4. Slide the included pocket into the
Radio Housing until secure.
(Figure C)
5. Locate the factory wiring harness
and antenna plug in the dash and
make all necessary connections
to the radio. Metra recommends
using the proper mating adapters
from Metra and/or AXXESS.
6. Install the assembled kit assembly
into dash.

Kit Assembly

(Figure A)
(Figure B)
99-9104
(Figure C)
3