Kit Assembly - Metra 95-7502 Instrucciones De Instalación

Double DIN head unit provisions
1. Connect the Radio Trim Panel
and brackets together and slide
the assembly over the aftermarket
radio. (Figure A)
2. Attach the DDIN radio brackets to
the Double DIN head unit using
the screws supplied with the unit.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from
Metra and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-7502
(Figure B)
3