Kit Assembly - Metra 99-9103 Instrucciones De Instalación

DIN radio provision
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Place the Radio Housing into the
radio opening in the dash.
3. Slide the sleeve into the radio
opening through the Radio
Housing, and secure by bending
the metal locking tabs outwards.
Make sure the locking tabs
catch both the edge of the Radio
Housing, and the dash.

Kit Assembly

4. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
5. Slide the radio back into the sleeve
until it clicks in.
99-9103
3