Basic Functions - auna 10032936 Manual De Instrucciones

EN
24
Remote control operation
• To operate the unit with the remote control,
point the remote handset at the remote sensor
on the front panel and press the appropriate
button on the remote handset.
• The remote works best within a range of 6 ~ 7
meters from the front panel and on an angle of
30 degrees.
• Bright sunlight or room light conditions can
interfere with the remote control.
• If the remote operation is unsatisfactory or
stops working entirely, first try replacing the
remote batteries, then try reducing the room
lighting conditions.
Lithium battery installation of remote control
The remote control includes one CR2025(3V) lithium battery.
• To replace the battery, gently push the clasp to the right direction
accordingly to the instruction and then pull out the battery
compartment.
• Take the drained battery out and install a new lithium battery(CR-2025)
in the compartment with the positive polarity upwarded. Then push
the compartment back to its position with a "click" sound indicating
installation finished.

BASIC FUNCTIONS

Tuning on the unit
• After connecting the power, press the Standby button (23) on unit or the
STANDBY button (16) on remote control to turn on the unit.
• Press the Function selection button (15) on unit or the FUNC button (1)
on remote control to choose FM/CD/USB/BT/AUX function.
Note: In CD/USB/BT/AUX mode, when the unit is not providing the main
function for 15 minutes, the unit will automatically switch into standby
mode. Press the Standby button to turn on the unit again.
Volume control
• Rotate the Volume knob (6) on unit to increase or decrease volume.