auna 10032936 Manual De Instrucciones página 28

EN
28
To search for a particular passage during playback (track scanning at high
speed):

• Press and hold
playing track at high speed until desired point (passage) appears, then
release the button for normal playback mode. Playback will start again
from this point.
To select a song which track number exceeds 10 (for MP3 disc only):
• To select a song/track which number exceeds 10, press the FOLD/10/M
+/- button (4 & 5) on unit or FOLD/10/M (UP/DOWN) key (5) on remote
control each time to skip forward or backward 10 tracks.
To select a desired folder (if the disc contains more than one folder):
• To select a desired folder, press and hold the FOLD/10/M +/- button
(4 & 5) on unit or FOLD/10/M (UP/DOWN) key (5) on remote control
each time to skip forward or backward a folder.
Programing tracks
Programming tracks of disc is possible when playback is stopped. Up
to 20 tracks for CD disc and 99 tracks for MP3 disc can be stored in the
memory in any order.
1 In stop mode, press the PROG./P-MODE/MEM. button (7) on unit or
MEM key (3) on remote control to enter program setting, the PROG
logo and "P01" will show on the display with "F00" flashing. Press
FOLD/10/M +/- button (4 & 5) on unit or FOLD/10/M (UP/DOWN) key
(5) on remote control to choose the desired folder. Press PROG./
P-MODE/MEM. (7) button on unit or MEM key (3) on remote control
again to confirm. After confirming the folder, "T00" will flash on the

display, press the
desired track to be programmed as P01, then press PROG./P-MODE/
MEM. button (7) on unit or MEM key (3) on remote control again to
confirm.
2 Repeat step 1 to store other desired tracks until all tracks are
programmed.
3 Press the Play button (16) on unit or the
control to start playback from the first programmed track.
4 Press the Stop button
5 To clear the program, you may press the Stop button
when the disc stopped and open the CD compartment lid, the program
will be erased.

FORWARD oder BACK button to scan the current

FORWARD oder
(14) on unit to stop program playback.
BACK button to choose the
Play key on remote
(14) on unit