F_ Changing The Position Of The Seat; G_ Placing The Child In The Seat - JANE Balance Manual Del Usuario

F_ CHANGING THE POSITION
OF THE SEAT
The BALANCE safety seat can be used in the rear
Rear facing
facing position from birth up to when the child is
105 cm tall or in the forward facing position from 15
months up to when the child is 105 cm tall.
The seat can be turned round 360°, the rotation only
locks in the two positions of use: rear facing and
forward facing.
To change the position of the seat:
Pull the lever (13) found on the side of the sear and
pull the seat towards you. 2.a
Release the lever and turn the seat to the required
position. It will lock when it reaches the position for
2.b
travelling.
WARNING:
In vehicles that are not fitted with rear seat doors,
the rotation of the seat is limited due to the space
between the seat and the sides.
Forward facing
G_ PLACING THE CHILD IN THE
SEAT
The BALANCE safety seat should preferably be ins-
talled on the rear seat of the vehicle. Before installing
35
EN