Software Upgrade - Philips 26PF5321 D/37 Guía De Uso Rápido

Ocultar thumbs Ver también para 26PF5321 D/37:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Channel
tuning
Available channels:
- Cable (analog NTSC or digital QAM):
max. from 1 to 125
- Antenna
(analog NTSC or digital ATSC): max. from 2 to 69
[fa tuned channel is not yet in the master channel map, the TV will attempt
to tune the channel and it will be added to the map.
[f the channel is not acquired, a message will appear that the channel is not
available.
When
you tune an audio-only
digital subchannel, a display appears with the
message Audio
only,
Note: $ubchannel
selections
- The new standards employed with digital broadcasting make it possible to receive
multiple program channels under a single major channel number which can be
selected by pressing the digit remote control direct-acces channel number entry.
- The number of channels shown at installation includes paid channels but you
may not be able to see all of them unless you sign up with cable TV operators,
Important:
After the installation of the TV channels has been done, always make a selection
in the Installation menu between Antenna or Cable whether you want to watch
Antenna TV channels or Cable TV channels,
If you make use of a signal splitter do not forget to put the switch in the
corresponding position.
Weal(
channel
installation
This enables you to do a weal< ATSC digital channel installation.
This is only
available for TV channels installed via an antenna connection
(see p. 4).
_[_ If a certain channel you expect to see is not tuned or is weak, you can install
it manually. Call your
local broadcasting
station to know what channel its
being transmitted
on,
O
Select that channel in the displayed list of TV channels (in the antenna mode).
The signal strength
is displayed and updated continuously
as you rotate the
antenna.
Software
upgrade
This menu allows you to upgrade your TV software
using a USB device,
USB
upgrade
It is possible to initiate an upgrade procedure
from a USB portable
memory,
The memory
device must be filled with the appropriate
upgrade image (and
structure)
which can be found on the www.philips,com/support
website.
How to upload a new software
version
on your portable
memory
device,
see Annex 1, p. 30.

Publicidad

Tabla de contenido
loading

Tabla de contenido