Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
PHI LIPS
Software Upgrade Application
Upgrade busy ...
Automatic
software
upgrade
procedure
For an automatic
software
upgrade copy the "autorun,upg"
file in the root
directory
of the USB portable
memory.
O
Power
off your TV and remove
all memory
devices.
Insert the USB portable
memory
that contains
the downloaded
software
upgrade.
0
Switch
on your TV with the power
switch
0
at the right side of the TV.
0
At startup
the TV will scan the USB portable
memory
until it finds the
update
content.
The TV will automatically
go to the upgrade
mode.
After a
few seconds
it will display the status
of the upgrade
procedure,
0
Warning:
• You are not allowed to remove the USB portable memory dunng the software
upgrade procedure_!
• In case of a power drop during the upgrade procedure, don't remove the USB
portable memory from the TK The TV will continue the upgrade as soon as the
power comes back.
• If you tn/to
upgrade to a software version lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
• If an enrer occurs during the upgrade you should retry the procedure or contact
your dealer:
When
the software
upgrade was successful, remove
the USB portable
memory
and restart your TV with the power switch
I 0 at the right side of
the TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from
your USB portable memory.
Manual
software
upgrade
procedure
For a manual
software
upgrade
copy the "autorun.upg"
file in a directory
called "Upgrades"
located
in the root
of the USB portable
memory.
Insert the portable
memory
that
contains
the downloaded
software
upgrade.
The TV will automatically
start the content
browser
menu.
Exit the menu
by pressing the MYCONTENT
key.
0
Select
Software
Upgrade
in the Installation
menu.
Go to Local upgrades/
applications.
The TV will list all compatible
images available on the USB portable
memory
and display the data for each selected upgrade image.
O
Select the correct
upgrade image and press the red color button
to start
the upgrade.
Your TV will restart and will automatically
go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning:
If you try to upgrade to a sofbAmre version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done in
case of real necessity,
0
When
the software
upgrade was successful, remove
the USB portable
memory
and restart your TV with the power switch
O
at the right side of
the TV.
Your TV will start up with the new software.
32
Publicidad
Tabla de contenido
