Philips 26PF5321 D/37 Guía De Uso Rápido página 21

Source
This menu allows you to name/label the accessory devices you have connected to the
external inputs/outputs.
_[_ Select Source in the Setup menu.
_[t Press the cursor right to enter the list of types of devices connected to the selected
input.
O Select the accessory device with the cursor up/down.
When you select AV|, AV2, AV3, HDMI, Side or Analog Audio In, a list appears
allowing you to identify which type of accessory device is attached to this input.
Clock
This allows you to use your TV as a clock.
Note:
Adjusting the cbck is necessary for the correct working of Lock a_er (See TV settings, Channels,
p. 17) features,
Closed captioning will not be displayed when the clock is being displayed. Press the clock
key again to switch off the clock if you want to see cbsed caption.
Auto clock mode
Select ClocE in the Setup menu.
Press the cursor right to select the Auto clock mode.
O Press the cursor right to instruct the TV to get the time automatically or manually.
Auto clock channel (only available when Auto clock mode is set to Automatic)
With the cursor buttons, select the channel number where time can be found by the
TV. Typically time can be found on PBS as well as some other channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu
item can not be selected,
Time - Day (only available when Auto clock mode is set to Manual)
With the cursor buttons, select and enter the correct time and day.
If Auto clocE mode Manual has been selected, and no clock search has been done,
the system will keep the entered time and day.
Time zone (only auoiloblewhen Auto dock mode is set to Automatic)
This function allows you to select your local time zone. Broadcasted time
information will correct the clock display for your local time,
_[_ Select Time zone with the cursor down.
Press the cursor right to select your local time zone.
Daylight saving (only availablewhen Auto clock mode is set to Automatic)
Daylight saving time is automatically set by specially broadcasted signals. This menu
item allows you to disable the automatic setting of daylight saving time. This is useful
if you live in an area or state where daylight saving is not applied, but you receive
channels from other areas where daylight saving signals are broadcasted.
Select Daylight saving with the cursor down.
Press the cursor right to select Automatic for automatic clock correction for
daylight saving time, based on specially broadcasted signals.
_t Select Off to disable automatic clock correction based on the specially broadcasted
signals.
13