Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Menu
preferences
OSD
O
O
Select OSD.
Press the cursor
right to select
Normal
or Minimum.
Normal
to activate
the continuous
display of the channel
number
(for max.
10 minutes)
and extended
display of TV channel
and program
information
on screen.
E.g. information
on the main or auxiliary
program,
input
signal
quality
of connected
accessory
devices,
the display format,
sound
mode,
availability
of Closed
Caption
service,
the audio
language, the
rating,
sleeptimer
setup.
Minimum
to activate
the display of reduced
channel
information.
Note: VVhen Closed Captions is switched on, continuous display o_ the channel
number and clock is not possible. Volume indication bar will not be visible,
Show emergency
alerts
(EAS)
This allows you to select
the alert priority
level of the information
disseminated
by the cable operator.
The standard
SCTE18
defines
an
Emergency
Alert
signalling method
for use by cable TV systems
to signal
emergencies
to digital devices
such as digital set-top
boxes,
digital TVs and
digital VCRs.
The Emergency
alert
signalling
scheme
defined
in the standard
allows a
cable operator
to disseminate
emergency
alert
information
related
to state
and local-level
emergencies
and warnings
in a cost-effective
and efficient
way, while minimizing
disruption
of programming.
An Emergency
alert
message
will have one of the following
priorities:
Low,
Hedium,
High or Maximum.
The Emergency alert message with priority
High or Haximum
will always
be presented.
Low or Medium
will be present or ignored depending on
the selected setting.
important:
When the TV clock is undefined (See Setup menu, Clock, p. 13), the
Emergency Alerts will be ignored.
O
O
The Emergency Alert
message display will contain
following
information:
- The Emergency Alert
text
- The start time + date
- The end time + date.
Select Show Emergency
Alerts
in the Menu preferences
menu.
Press the cursor
right and select
one of the Emergency
alerts
options:
- Always, when you always want
the Emergency
alert
messages
to be
displayed
when
available;
- Skip low priority,
when you want
the messages
with low level to be
ignored;
- Skip low/medium
priority,
when
you only want
the messages
with high
priority
to be displayed.
SetJChange
PIN
O
Select Set or Change
PIN with the cursor
down.
If no PIN-code
exists yet, the menu
item is set to Set PIN. Follow the
instructions
on
screen.
If a PIN-code
has previously
been entered,
the menu
item is set to Change
PIN. Follow the instructions
on screen.
All number
combinations
from 0000 to 9999 are valid numbers.
The Henu
preferences
menu
reappears
with a message
confirming
that
the PIN has been
created.
Reset
AV settings
This function
allows you to reset
most
of the picture
and sound
settings
to
their predefined
factory
states.
Select
Reset
AV settings
with the cursor
down.
Press the cursor
right.
Press the OK button
to erase
settings
and reset
them to their default
vaJues,
12
Publicidad
Tabla de contenido
