Philips 26PF5321 D/37 Guía De Uso Rápido página 30

Ocultar thumbs Ver también para 26PF5321 D/37:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Video
Camera/Games
Console
to TV
26PF5321D
TVSideJack_nel
26PF5351D
37PF7321D
42PF5321D
32PF5321D
42PF5421D
42PF7321D
32PF7321D
42PF7421D
50PF7321D
32PF7421D
Remote
Control
AV Button
_ii_ilSide connections
- USB/Headphone
37PF7321D
42PF5321D
26PF5321D
42PF5421D
42PF7321D
26PF5351D
42PF7421D
50PF7321D
32PF5321D
32PF7321D
32PF7421D
°®1
re_
(_) .... ®
0 v_o®
Using
Composite
Audio/Video
Input
O
Connect
the video cable (yellow) from the video output on camera (or
other
device) to the video input (yellow)
located on the side of TV.
Ot
Connect
audio cables (red/white)
from audio outputs
on device to audio
inputs (red/white)
on the side of the TV.
0
Tip: For mono devices, connect only white audio cable from device's audio
output to white audio input on the side of TK
Turn on the TV and the device. Press the AV button
on the remote
control
until FRONT/SIDE
appears on TV screen.
Press PLAY on the device to verify connection.
Headphone
Insert the plug into the headphone
socket ,_, as shown.
Press the MUTE button
on the remote
control
to switch off the internal
loudspeakers
of the TV.
The headphone impedance must be between 8 and 4000 Ohm, The
headphone socket has a 3.5 mm jack
In the Sound menu select Headphone
volume
to adjust the headphone
volume.
Viewing
content
from
a USE;
device
Inserting
a USB device
Note: USB clevices are not supplied with this TV.
Insert a USB device in the USB connector at the side of the TV.
When
a USB device is inserted, the Multimedia
browser
menu is displayed
automatically,
see further.
Removing
the USB
device
First switch off the My Content
menu. To do so, navigate to the
Multimedia
browser
menu and press the _
button
to exit the menu.
Remove the USB device.
Digital
Surround
receiver
Back of TV
Connect
a Digital MuldChannel
Surround
receiver
to the DIGITAL AUDIO
OUT (SPDIF OUT)
connector
at the bottom
of the TV.
AUDIO
OUT
(DIGITAL)
The TV can output
Digital audio via the DIGITAL AUDIO OUT (SPDIF OUT)
connector
to an external
amplifier
or receiver.
If your amplifier
or receiver
has a matching connector
for Digital Audio In,
you can connect
it with a single cable to the TV's DIGITAL AUDIO OUT
(SPDIF OUT).
See Connect
Accessory
Devices, p. 22.
22

Publicidad

Tabla de contenido
loading

Tabla de contenido