Installation; Mechanical Installation - Festo EGSP Serie Instrucciones De Utilizacion

EGSP/EGSK
5

Installation

Mechanical installation

Do not modify the settings of screws and
S
threaded pins if not directly requested to
do so in these operating instructions.
Mount the motor on the electrical slide in
S
accordance with the assembly instruc
tions for the motor mounting kit recom
mended in the catalogue.
When assembling in a vertical or sloping position:
Warning
Falling masses can cause personal injury
and material damage (crushing). If there is
a power failure or if the spindle nut breaks,
the work mass will drop.
S Make sure that you use only motors with
an integrated holding brake.
S Check whether external safety measures
are necessary to prevent damage due to
spindle nut fracture (e.g. toothed lat
ches or moveable bolts).
Note
S Make sure that you mount the EGSP/EGSK using only the lower threaded
holes 4 on the basic profile.
The holes on the side are intended for fastening accessories (e. g. sensor
rail).
Make sure that the device is installed free of mechanical stress and sag (even
S
ness of bearing surface 0.05% of stroke length).
Position the EGSP/EGSK so that its control elements can be reached.
S
Festo EGSP/EGSK 0901NH English
Fig. 2
Fig. 3
25