Abbott ALERE AFINION AS100 Manual Del Usuario página 36

Gallery of Icons
Other symbols and signs
Other symbols, signs and abbreviations that may appear during operation of the Alere Afinion AS100 Analyzer are explained below.
These symbols or signs are only informative and can not be activated like the buttons.
Symbol Meaning
Wait!
Information code
Operator ID
Patient ID
Control ID
Quality control pass
Quality control
failed
Result is above
acceptable range
Result is below
acceptable range
C
Control
O-ID Operator ID
P-ID Patient ID
C-ID Control ID
RUN# Run number
LOT# Lot number
USER User
SUPERVISOR Supervisor
34 | EN
Appears when?
Hour-glass icon that appears in the start-up procedure.
Icon used along with a code number [#] that corresponds to code specific information
messages [#] (see "Information codes and troubleshooting").
Icon illustrates the operator ID.
Icon illustrates the patient ID.
Icon illustrates the control ID.
Control result is within acceptable range.
Control result is outside acceptable range.
The displayed control result is above acceptable range.
The displayed control result is below acceptable range.
The letter C will appear on the screen when the control mode is selected.
Abbreviation used in the patient and control records.
Abbreviation used in the patient records.
Abbreviation used in the control records.
Abbreviation used in the patient and control records for the run number of the
analysis. This numbering is reset each day at midnight.
Abbreviation used in the patient and control records for the lot number of the Test
Cartridge.
Operator with user privileges.
Operator with supervisor privileges.