Boston Scientific LATITUDE 6280 Manual Del Paciente página 33

8. Your Communicator has successfully connected
to the LATITUDE system if the wave lights are lit a
solid green as shown below.
Setup is complete, and no further action is needed
at this time. Leave your Communicator plugged in.
• If this process takes longer than several
minutes, software download and installation
may be occurring. Refer to "Software Download
and Installation" on page 35.
• If the wave lights are not lit a solid green, refer
to "Troubleshooting" on page 46.
Important: Your Communicator should remain
connected to the electrical outlet and your internet
service.
LATITUDE Communicator Patient Manual
TM
29