Action:
(cont.)
If using the Internet (LATITUDE USB
Ethernet Adapter):
• Make sure the USB cable provided
with the USB Ethernet Adapter is
connected at one end to the USB
Ethernet Adapter and at the other
end to the USB port on the back of
the Communicator.
• Make sure the Ethernet cable
provided with the USB Ethernet
Adapter is firmly connected at one
end to the USB Ethernet Adapter
and at the other end to the Ethernet
port for your internet service.
• If the green light on the front of the
USB Ethernet Adapter is not on,
make sure the internet modem or
router is powered on.
If using the Internet (LATITUDE
Wireless Internet Adapter):
• Make sure the wireless internet
adapter is powered on by verifying
that the power light on the front is lit
solid green.
• Make sure the LATITUDE USB
Accessory Adapter is connected to
the back of the Communicator. No
other USB devices or phone cords
should be connected to the back of
the Communicator.
LATITUDE
Communicator Patient Manual
TM
59