• This equipment has been tested and found to
comply with applicable safety portions of the
AAMI ES 60601-1:2005, CAN/CSA-C22.2 NO.
60601-1:08 and IEC 60601-1:2005 standards.
• This equipment has been tested and found
to comply with the following electromagnetic
compatibility (EMC) standard: IEC 60601-1-
2:2007.
• Accessory equipment connected to the analog
and digital interfaces (signal inputs and
signal outputs) must be certified according to
the respective IEC standards. Anyone who
connects additional equipment to the signal
input parts or signal output parts may configure
a medical system, and is therefore responsible
that the system complies with the requirements
of clause 16 of IEC 60601-1:2005. If in doubt,
consult the technical service department or your
local representative.
86
LATITUDE
Communicator Patient Manual
TM