Boston Scientific LATITUDE 6280 Manual Del Paciente página 37

9. Plug the Ethernet cable into an Ethernet port for
your Internet service, such as a modem, router, or
Ethernet wall jack.
Figure 9. Internet (using the LATITUDE Wireless
Internet Adapter)–Pairing
10. To begin pairing, press the button on the back of
the wireless internet adapter. The
on front will flash green to signal pairing mode is
active.
11. When the Heart button flashes on the front of your
Communicator, press it.
• Your Communicator's wave lights will flash
green in sequence and repeat for several
minutes as shown in "Using the Heart Button"
on page 37.
• If you have previously completed initial setup,
the Heart button will not flash at this point.
Instead, press and hold the Status button on the
back of the Communicator for at least 3 seconds
to complete pairing. If pairing is successful, you
will see solid green Sending Waves and a blue
doctor icon; the Collecting Waves will not be lit.
Refer to "Status Button" on page 44.
10
LATITUDE Communicator Patient Manual
TM
indicator
33