Install Decorative Flue Cover (Optional); Reinstall Panel Assembly, Grease Tray And Baffle Filters; Light Bulbs Replacement - Best WPD39M Serie Instrucciones De Instalación

11. INSTALL DECORATIVE FLUE COVER (OPTIONAL)

AEWPD Series
Refer to the instructions included with the optional decorative flue.

12. REINSTALL PANEL ASSEMBLY, GREASE TRAY AND BAFFLE FILTERS

Remove protective plastic film covering filters before installing them.
1. Push panel assembly back inside hood and secure to the hood using previously removed screws (see step 5).
2. Reinstall grease tray.
3. Insert one side of the filter into the side channel of the hood. Raise the other side toward the center of the hood and insert in the grease
drip rail.

13. LIGHT BULBS REPLACEMENT

This hood requires 120 V, 50 W, MR16 with GU10 base, shielded halogen bulbs (included). (2 for 36" width hood, 3 for 48" and 60" width hoods.)
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,
only install shielded halogen lamps. Also, never install a cool beam, a dichroic lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
1. To remove bulbs, gently push upwards and turn counterclockwise to
disengage bulb leads from their grooves.
NOTE: To ease removal of the bulbs, use a rubber dishwashing glove or
use suction cup tool available from Best. Contact Best Customer
Service at 1-800-558-1711 to order suction cup tool, part
no. 99526707.
2. Install the new bulbs by placing the bulb leads into their grooves in the
socket.
3. Gently push upwards and turn clockwise until secure.
14. CARE
Baffle Filters
The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates greater
grease like frying foods or wok cooking.
Remove baffle filters by pushing them towards the side of the hood and rotating filters downward. Baffle filters are dishwasher safe. Allow
filters to dry completely before reinstalling them in the hood.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using phosphate detergent
or as a result of local water conditions—but this will not affect filter performance. This discoloration is not covered by the warranty.
Grease Tray
The grease tray should be emptied and cleaned frequently. Remove from
hood (as illustrated at right) and use a warm detergent solution. Wash
more often if your cooking style generates greater grease like frying foods
or wok cooking. Allow grease tray to dry completely before reinstalling it
in the hood.
CAUTION
WARNING
!
1
HO0199
HD0481
9
2 3
1
2