Prepare Decorative Flue - Best WC53I Serie Instrucciones De Instalación

13. PREPARE DECORATIVE FLUE

Remove protective plastic film covering the lower flue only.
Peel off both corners at the top of the upper flue (note that upper part has one hole on left and right
sides; see image on the right).
Position the lower flue rear notches down.
Gently slide upper flue inside lower flue.
Both lower and upper flues are included with the hood, but for a 10-ft. to 11-ft. ceiling, discard the
provided upper flue and use the optional extension flue, part no. AEWC53SB.
L
OWER FLUE
REAR NOTCH
HO0271
14. INSTALL DECORATIVE FLUE
Carefully slide in place decorative flue base (notches end first) in the groove
(shaded part in inset at right) behind the exterior wall of the top of the hood.
HO0272
U
PPER FLUE MOUNTING BRACKET
F
RONT VIEW
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be U
PPER
inside the flue. Secure the upper flue to its bracket using 2 no. 8 x 3/8" screws (included).
FLUE
See illustration beside.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue.
HO0140
8