10. PREPARE THE DECORATIVE FLUE
DO NOT REMOVE the protective plastic film covering the upper flue yet.
NOTE: Both lower and upper flues are included with the hood, but for ceilings of 9 ft. or more, discard the provided lower and upper flues
and use the optional flue extension, part no. AEWCN1SS (sold separately).
Remove the upper flue from inside the lower flue. Remove protective plastic film covering the lower
flue only.
Peel off both corners at the top of the upper flue.
NOTE: For non-ducted installation only, remove enough plastic film to clear the louvers.
Gently slide upper flue inside lower flue, louvers end up.
NOTE: Upper flue can be reversed to hide louvers in some applications depending on installation
heights.
11. INSTALL THE DECORATIVE FLUE
Carefully slide in place decorative flue base in the groove on the top of the hood.
CAUTION
8
L
OUVERS
HO0387
HO0291