Prepare Decorative Flue - Best WT32I Serie Instrucciones De Instalación

11. PREPARE DECORATIVE FLUE

Remove protective plastic film covering the lower flue only.
Peel off both corners at the top of the upper flue.
Position the lower flue rear notches down (the ones with the 45° angle).
Gently slide upper flue inside lower flue, louvers end first (so that louvers are
hidden inside lower flue, as they are not needed for the ducted installation).
12. INSTALL DECORATIVE FLUE
Carefully slide in place decorative flue base (notches end first) between the
shaded part and the exterior wall of the top of the hood.
Slide up the upper flue until it is aligned with its mounting bracket. The bracket
must be inside the flue. Secure the upper flue to its bracket using
2 no. 8 x 3/8" screws (included). See illustration at right.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue.
L
OUVERS
HO0143
U
U
PPER
FLUE
- 9 -
HO0144
L
OWER FLUE
REAR NOTCH
PPER FLUE MOUNTING BRACKET FRONT VIEW
HO0140
L
OWER FLUE
REAR NOTCH