Technical Data And Further Information; Mounting - Mettler Toledo M100 Guía De Configuración Rápida

2

Technical Data and Further Information

The most important technical data such as supply voltage are given on the name plate on the
transmitter. For further technical data such as accuracy refer to the Operating Instructions. This
document, the Operating Instructions and software are on the supplied CD-ROM. You can also
download the documentation via Internet "www.mt.com/M100".
3

Mounting

1 M100 transmitter
2 Extension tube
3 Sensor or electrode
4 Sensor housing
h
Note: Power off device during installation.
1. Install sensor housing as described in the Operat-
1
2. Carefully insert sensor into the sensor housing.
3. Screw sensor housing and extension tube hand-
2
4. Unscrew cover of the M100 transmitter.
5. Perform wiring. See "Electrical Connection"
3
6. Screw cover of the M100 transmitter.
4
ing Instructions of the sensor housing.
Screw in sensor hand-tight.
tight. Do not turn the M100 transmitter. Turn ex-
tension tube only.
chapter on Page 36.
en
35