Leuze electronic BPS 300i Manual De Instrucciones página 13

Safety
This sensor was developed, manufactured and tested in line with the applicable
safety standards. It corresponds to the state of the art.
Intended use
The BPS is an optical measuring system which uses visible red laser light to deter-
mine the position of the BPS relative to a permanently mounted bar code tape.
Areas of application
The BPS is designed for positioning in the following areas of application:
- Telpher lines
- Travel and lifting axes of high-bay storage devices
- Repositioning units
- Gantry crane bridges and their trolleys
- Elevators
CAUTION
Observe intended use!
 Only operate the device in accordance with its intended use. The protection
of personnel and the device cannot be guaranteed if the device is operated
in a manner not complying with its intended use.
Leuze electronic GmbH + Co. KG is not liable for damages caused by
improper use.
 Read the technical description before commissioning the device. Knowledge
of this technical description is an element of proper use.
NOTE
Comply with conditions and regulations!
 Observe the locally applicable legal regulations and the rules of the
employer's liability insurance association.
Foreseeable misuse
Any use other than that defined under "Intended use" or which goes beyond that
use is considered improper use.
In particular, use of the device is not permitted in the following cases:
- in rooms with explosive atmospheres
- as stand-alone safety component in accordance with the machinery
1)
directive
- for medical purposes
1) Use as safety-related component within the safety function is possible, if the com-
ponent combination is designed correspondingly by the machine manufacturer.
EN
13