Metrohm 758 KFD Titrino Instrucciones Para El Uso página 113

758 KFD Titrino
3.2.2.52. MemoryCard.ChangeDir
MemoryCard.ChangeDir.Name
MemoryCard.ChangeDir.Checksum
MemoryCard.ChangeDir.Checksum.Value
Changing the current directory. The action is carried out if "$G" is transmitted
to the corresponding node.
Do not use blank characters before and after name!
The checksum characterizes the content of the directory.
3.2.2.53. MemoryCard.CreateDir
MemoryCard.CreateDir.Name
Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!
3.2.2.54. MemoryCard.DelDir
MemoryCard.DelDir.Name
Delete directory. The action is carried out if "$G" is transmitted to the corre-
sponding node.
Do not use blank characters before and after name!
3.2.2.55. MemoryCard.Backup
MemoryCard.Backup.Name
Backup of the internal memory onto the card. The action is carried out if "$G"
is transmitted to the corresponding node.
Do not use blank characters before and after name!
3.2.2.56. MemoryCard.Reload
MemoryCard.Reload.Name
Reload a backup from the memory card into the internal memory. The action
is carried out if "$G" is transmitted to the corresponding node.
Do not use blank characters before and after name!
3.2.2.57. MemoryCard.Format
MemoryCard.CardLabel.Name
Format the memory card. The action is carried out if "$G" is transmitted to the
corresponding node.
Do not use blank characters before and after name!
3.2.2.58. MemoryCard.FreeMem
Free memory on the card. $Q sends number of free bytes, e.g. "4928".
3.2.2.59. MemoryCard.BatteryChange
MemoryCard.BatteryChange.Date
Date for changing battery. The date will be set with "$G".
3.2 Remote control commands
up to 10 ASCII characters
up to 10 ASCII characters
up to 10 ASCII characters
up to 10 ASCII characters
up to 10 ASCII characters
up to 8 ASCII characters
YYYY-MM-DD
$G
$G
read only
$G
$G
$G
$G
$G
read only
$G
109