• Repeat again for xx intermediate times (
• Pressing P1 stops the chronograph (display on the upper screen:
nating with the 1/100
• Pressing again on P1 restarts the chronograph.
• A long press on P2 will reset the chronograph to zero as well as all the interme-
diate times (
RESET
If one forgets to turn the timing off, when the total time reaches 99 hours, 59
minutes and 59 seconds, measuring ceases and the upper screen displays
(for overflow).
c) Flyback
At any time, a long press on P1 will restart timing from 0 (when the pushpiece is
released): this is the
the active timing second. The
times that have already been recorded.
d) Tachymeter
When the chronograph has been stopped after a measured time without an inter-
mediate time, a short press on P2 will display the average speed corresponding
to the total time measured – for a pre-introduced distance (see chapter 10.f). The
upper screen displays
th
of a second).
).
function. The seconds hand positions itself directly on
FLyBACK
FLyBACK
, and then the speed unit; the lower screen shows the
SPEED
xx) up to a maximum of 50 times.
SPLIT
function results in the loss of all intermediate
38
alter-
CHR ADD
OVF