Please note that the battery life of the watch depends on the frequency with
which notifications appear: the more notifications there are, the less battery life
the watch will have.
17. BATTERY CHARGING STATUS (
At any time, the BAT function shows the status of the battery charge in percentage,
by indicating
BAT
charge is less than 30-25%. When the battery reaches this level, the seconds hand
advances in 4-second increments.
a)
mode
DEEP SLEEP
mode allows the battery to be disconnected from the watch's electronic
DEEP SLEEP
circuits and thus to preserve its performance (capacity). This function is useful if
the watch is not used over a relatively long period. This operation also enables a
reset of the watch. The manual sleep mode setting procedure is as follows:
• Select the
BATTERy
• Pull the crown into position 2. The upper screen displays
. Select
SLEEP
DEEP SLEEP
• Give P1 a long press to confirm the extended standby. The hands "park"
immediately. Once the procedure is finished, the display turns off and the
electronics are disconnected. Following this, the pushpieces and crown are
completely inactive.
BAT
xx
on the upper screen. Charging is recommended when the
%
function by turning the crown.
by turning the crown.
xx
)
%
57
or
DEEP SLEEP
SOFT