Breitling EXOSPACE B55 YACHTING Manual De Instrucciones página 41

Ocultar thumbs Ver también para EXOSPACE B55 YACHTING:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

f) Introducing the distance for the tachymeter
To enable the tachymeter to calculate the speed correctly, the distance corresponding
to the time recorded must be introduced. This setting is done as follows:
• With
CHR ADD
position 2; the upper screen will display
distance), followed by one to three letters (for the distance unit); the distance
unit flashes.
• Select the distance unit by turning the crown – see figure 2:
Confirm by pressing P2; the first digit of the distance value will flash.
Select the units, the tens and then the hundreds for the distance by turning the
crown, confirming each time by pressing P2.
Press the crown back to neutral position 1.
g) Rereading intermediate times
Rereading of intermediate times is achieved by successive pressing of P2 with
the display of
h) Recovery of times
If the watch is connected to a smartphone, using the application on the latter
it is possible to recover information on times recorded.
mode stopped without displaying the speed, pull the crown into
to
SPLIT01
SPLIT
, followed by 3 digits (for the
DIST
xx intermediate times memorized.
40

Publicidad

Tabla de contenido
loading

Tabla de contenido