Breitling EXOSPACE B55 YACHTING Manual De Instrucciones página 59

• Do not forget to push the crown back into neutral position 1.
To reactivate the watch, it must be charged using the cable supplied, and a
complete reinitialization must be performed, as described in chapter 3.
b) mode
SOFT SLEEP
The
SOFT SLEEP
equivalent to the mode adopted by the watch when the remaining battery life
is too low (level 3 – chapter 2.b). This function is useful in the event of the watch
not being used for a short time and when one wishes to maintain a maximum of
the battery life as well as the settings and the correct time. The setting procedure
for the active standby state is as follows:
• Select the
BATTERy
• Pull the crown into position 2. The upper screen will display
. Select
SLEEP
• Give P2 a long press to confirm standby mode. The hands will "park". Once the
procedure is terminated, the display turns off but the basic time of the watch
remains active. At this point, the pushpieces and crown are completely inactive.
• Do not forget to push the crown back to neutral position 1.
In order to reactivate the watch, it must be charged using the cable provided.
mode allows the watch to be put in a state of active standby,
function by turning the crown.
by turning the crown.
SOFT SLEEP
58
or
DEEP SLEEP SOFT