i) Synchronizing the seconds hand
If the seconds hand does not position itself exactly on 0 in
as follows:
•
Pull the crown into position 2.
•
Press P1 to activate synchronization of the hand (
•
Turn the crown to reposition the hand on 0.
•
Press the crown into neutral position 1.
11. LAP TIMER CHRONOGRAPH (
The lap timer chronograph allows several times to be recorded one after the other.
When the recording stops, the next one starts automatically. A maximum of 50
times can be stored and reread when the recording is finished.
When the
LAP TMR
tically on 0 and becomes the chronograph hand. With each new recording, the
hand goes back to zero and positions itself directly above the second in progress.
It returns to its usual function when the lap timer chronograph function is exited.
a) Recording several laps (
• Select the
LAP TMR
LAP TMR
function is selected, the seconds hand positions itself automa-
)
LAP
function by turning the crown.
SyNCHRO
)
41
mode, proceed
CHR ADD
).