Alarm Signal - Breitling EXOSPACE B55 YACHTING Manual De Instrucciones

• Pull the crown into position 2 (
( ), minutes (
HOUR
59 minutes and 59 seconds, confirming it each time by pressing P2.
• Adjust the type of alarm signal desired (
alarm),
VIBRATE
the crown and confirming by pressing P2.
• Press the crown back into neutral position 1.
b) Use
• Pressing P1 will start the timer (
• Pressing P1 a second time will stop it (
it ( ).
TMR RUN
• When the timer is working, a long press on P2 will reset the original settings
( ).
RESET
During the last 3 minutes, the seconds hand counts counter-clockwise the seconds
and a beep is emitted every second for the final 10 seconds. At 0, an alarm sounds
for 20 seconds, with a 10-second reminder after 1 minute. The upper screen flashes
ž . The alarm can be stopped by pressing one of the two pushpieces or on
TMR 0
the crown.
SET TMR
) and seconds (
MINUTE
(vibrating, silent alarm) or
TMR RUN
) and turning the crown, adjust the hours
) up to a maximum of 99 hours,
SECOND

ALARM SIGNAL

(both together) by turning
BOTH
).
), while pressing again will restart
TMRSTOP
52
display):
BUZZER
(sound