Error Messages - Knick Stratos Pro A2 PH Serie Inicio Rápido

Info text
(is displayed in case of
Error
fault when the Info key is
pressed)
ERR 99 DEVICE FAILURE
ERR 98 CONFIGURATION ERROR
ERR 97 NO MODULE INSTALLED
ERR 96 WRONG MODULE
ERR 95 SYSTEM ERROR
ERR 01 NO SENSOR
ERR 02 WRONG SENSOR
ERR 03 CANCELED SENSOR
Error codes

Error Messages

Problem
Possible causes
Error in factory settings
EEPROM or RAM defective
This error message only occurs
in the case of a total defect. The
device must be repaired and
recalibrated at the factory.
Error in confi guration or
calibration data
Memory error in device program
Configuration or calibration data
defective; completely reconfig-
ure and recalibrate the device.
No module
Please have the module installed
in the factory.
Wrong module
Please have the module replaced
in the factory.
System error
Restart required.
If error still persists, send in the
device for repair.
pH sensor *
Sensor defective
Sensor not connected
Break in sensor cable
Wrong sensor *
Sensor devaluated *
17