How It Works; Preparing For Use; Unpack - Tornado BR 13/1 MULTIWASH Manual De Operaciones Y Mantenimiento

How it Works

1. Cleaning liquid in the solution tank is sprayed to the floor.
The counter rotating brushes scrub the floor and also
throw the dirty water on the conveyor drum. The front
brush does most of the scrubbing and drying. The rear
brush completes the scrubbing and collects the remaining
water off the floor.
2. A blade fitted to the recovery tank wipes the drum and
collects the dirty water.

Preparing for Use

Unpack

The purpose of these caps is to distinguish between different brushes
when the machine is used in different area. This just helps the operator
easily identify the brushes to avoid cross contamination.
1. Bottom Handle
2. Machine Body
3. Pump Housing
4. Solution Tank
5. Top handle & Cable Pull
6. Handle LH & RH
7. Brush Shafts (2)
8. Screws & Washers
9. Cable Retainer
10. Power Cord
11. Recovery Tank
12. Hook
13. Knob
10