Electrical Connection - Tornado BR 13/1 MULTIWASH Manual De Operaciones Y Mantenimiento

I
ntroduction
This Tornado floor cleaning machine is designed to be used on smooth, even floors indoors. They can be used on most
floor surfaces including carpet, wood, PVC, rubber and stone.
We are confident the machines will give years of trouble free service, coupled with ease of use and minimum
maintenance.
The following instructions contain important information about the machine and safety advice for the operator.
To save space and to protect the machine during transit, it is supplied with its handle disassembled. Follow the simple
assembly instructions.
Warning: The machine must be fully assembled in accordance with these instructions before connecting to the electric supply.
Important Safety Advice
When using electrical equipment, basic safety precautions should be followed:
• Read all instructions carefully before use.
• The machine must be unpacked and assembled in accordance to the instructions given.
• Keep children and unauthorized persons away from the machine when in use.
• Unplug the machine when not in use.
• Switch off the machine before removing the plug.
• When unplugging the cord, pull the plug and not the cord.
• Keep the power supply cord away from moving parts. Do not run the machine over the cord.
• Do not operate the machine with a damaged supply cord or plug, or after the machine malfunctions or is damaged in
any way. Contact an authorized Service Center for repair or adjustment.
• When cleaning or performing maintenance to the machine, make sure that it is unplugged.
• Regularly inspect the power supply cord. If it is damaged, it needs to be replaced.
• Be careful when using the machine near the top of stairs.
Guidelines for the Operator
• Operators must be fully trained in the use of the machine in accordance with these instructions.
• Operators should be physically able to maneuver, transport and operate the machine.
• Operators should be able to recognize abnormalities in the machine.
• This machine should always be connected to a fully earthed power supply of the right voltage and frequency.
• Let the machine do the work. Grip the handle as lightly as possible.
• Wear suitable footwear to avoid slipping.
• Wear suitable clothing to keep dry and warm.
• Do not smoke when using the machine.
• Do not run the machine dry, as this could damage the floor surface or the machine.
• Do not use excessively foaming or highly corrosive cleaning solutions. If operating on a flooded floor, ensure that
water depth does not exceed 6mm (1/4 inch).
• Do not operate the machine on rough surfaces, explosive atmospheres, slopes, near flammable liquids and where
hazardous dusts are present.
• Only use brushes and accessories per the instruction manual. The use of other brushes and accessories may cause
safety problems.

Electrical Connection

Before connecting the machine to the power supply, check that your supply voltage corresponds with
on the body of the machine.
Important: If the supply cord is damaged, it must only be replaced by a cord from the manufacturer
or an authorized service agent.
8
the rating label