Publicidad
17
Technical Information
Connection of the High Vacuum Flange
Installation of ISO-K Flange
For ISO-K flange connections, fix the two flanges with the clamps
(high resistance 12.9 Agilent IC 63250 DCMZ) as shown in the
following figure (a protective screen can optionally be used).
Figure 45
Use the required number of claw clamps:
Tighten the claw clamps with a torque of 35 Nm.
320/336
10 for ISO 160 flange
TwisTorr 704 FS User Manual / 87-901-051-01
Publicidad
Capítulos
