Installation Of Iso-K Flange - Agilent Technologies TwisTorr 305 FSQ Manual Del Usuario

Instructions for Use

Installation of ISO-K Flange

For ISO-K flange connections, fix the two flanges with the clamps model
IC63250DCMZ or equivalent, as shown in the following figure (a protective screen
can optionally be used).
Figure 27
Use the required number of claw clamps:
4 for ISO 100 flange

4 for ISO 160 flange

Tighten the bolts with a torque of 22 Nm.
Agilent TwisTorr 305 FSQ & 305 SF User Manual 173