Keypad - Veeder-Root TLS-50 Manual Del Usario

Introduction

KEYPAD

The front panel keys are used to scroll through the tank parameter displays and to make changes to the system
setup.
Select key - press to scroll from one display to the next in the current menu. If the display
shown is the last in a submenu, the Select key scrolls the display up to the display at the
top of the submenu.
Enter key - press to scroll to the first display in the submenu of the current item. If the
current item does not have a submenu there is no response.
Back key - press to scroll back to the previous display in the current menu. If the
display is the first in a submenu, you scroll to the display that was used to enter
the submenu.
Silent key - press to deactivate the audible alarm annunciators; the internal
beeper and in the case of an overfill alarm, the remote overfill alarm output. If
another alarm occurs after the annunciators have been deactivated, the annun-
ciators will reactivate. The beeper and remote alarm output can be tested by an
extended key press of the Silent key.
Tank key - press to scroll to the next tank number.
Print key - press to print the report associated with the current displayed menu
item. If the report includes tank information, the report will contain data for all
configured tanks. This key is blank if the console does not have the Serial Pack-
age option.
4
Front Panel Controls