Electrical Safety (Only Applicable For Equipment With Electric Power) - Bremshey Sport RN2 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 95
EN
Do not use or store the equipment in humid surroundings. The air humidity must
never be more than 80%.
Only use the equipment for its intended purpose. Do not use the equipment for
other purposes than described in the manual.
Do not use the equipment if any part is damaged or defective. If a part is
damaged or defective, contact your dealer.
Keep your hands, feet and other body parts away from the moving parts.
Keep your hair away from the moving parts.
Wear appropriate clothing and shoes.
Keep clothing, jewelry and other objects away from the moving parts.
Make sure that only one person uses the equipment at a time. The equipment
must not be used by persons weighing more than 120 kg.
Do not open equipment without consulting your dealer.
Electrical safety (only applicable for equipment with electric
power)
Before use, always check that the mains voltage is the same as the voltage on
the rating plate of the equipment.
Connect the equipment to a grounded wall socket. The equipment is supplied
with a grounded cable. Insert the grounded plug into a wall socket that is
properly installed and grounded in accordance with the local codes and
ordinances.
WARNING
– If you doubt whether the equipment is properly grounded, consult a
qualified electrician. Do not alter or modify the grounded plug. If the
grounded plug does not fit into the wall socket, have an appropriate
wall socket installed by a qualified electrician.
Do not use an extension cable.
Keep the mains cable away from heat, oil and sharp edges.
Do not alter or modify the mains cable or the mains plug.
Do not use the equipment if the mains cable or the mains plug is damaged or
defective. If the mains cable or the mains plug is damaged or defective, contact
your dealer.
Always fully unwind the mains cable.
12
RN2

Publicidad

Tabla de contenido
loading

Tabla de contenido