Controller Connection
J6 – Fan
The 24 Vdc, 150 mA maximum output voltage is present after START
pushbutton is pressed and will remain present until a fault condition
is displayed on front panel display or the turbopump is stopped.
This is a dedicated output for the optional Turbo-V 301 pump cooling
fan (see orderable parts table).
If you already have fan installed, use the available adapter cable to
connect to the pump.
Figure 6
Turbo-V 301-AG Rack Controller User Manual / 87-900-982-01
Fan Connector
Technical Information
Controller Connection
(F)
17
213/294